• 10 comments
    • Early model frame with all 2010 parts bolted to it. All that has been done in that pic is the rear rack has been cut down to keep the airflow restrictor. Have changed it a bit since this pic. Now has no rubber hose and has the back of the air box drilled out to get enough air flow.

    • More recent pic. But I don't have one from the other side.

    • Ah yer what was the parts off ? And what is the pipe off ?

    • And how come you had to drill into the air box tho ? Thought it would have worked as that is how it is meant to be ?

    • The pipe is off a pit bike. To get enough air for it to run properly without coughing and spluttering with the pipe on and a bigger jet in the carb, I had to do it. Probably would have been easier to run a pod filter but I didn't have one so I drilled the holes and it worked.

    • Fair enough and do you no what pit bike it is off and did you try takeoff the rack restrictor ?

    • I share the same compliments about the tray baffle as James , neat solution there.

    • Yes James. I tried a few things and found it the best when I had the back cover off the air box. Hence the holes.

    • Fair enough :)

    • The air box.