• anyone no how many onces of fluid the 350x front forks need gota do my seals

    anyone no how many onces of fluid the 350x front forks need gota do my seals

    10 comments
    • ya if u want not sure if gonna start on doingthem tonight

    • 9.8

    • Do the kx80 forks slide right in? Brake mounts etc? I redid my seals two months ago and put 15W in them with factory specs, it called for 9.8 but ended up being 10 or a little over to get the 8.5" with full compression. Never heard of doing 5.5", would be concerned about to much pressure on the seals ? I ran them right after I redid them with 10psi in them both on a Mx track all day, felt pretty tight but not smooth

    • so usposed to run 10psi airpressure also

    • The book states 0 psi for normal running and 10psi Max or it will feel to stiff

    • I've heard not to put air in them because they will blow the seals every time. the schrader valve is spposed to be there to bled the air out is what ive always been told

    • I don't have a book or anything, that's just what I've heard

    • ya i heard that also but my buddy has the book and says ur sposed to put air

    • I ended up dropping them to around 5 but have never put any in them till now, wanted to feel how it handled on the jumps.. trying to get my suspension to feel more like an R or I'm gonna change it up. Still trying to figure out how to put a 450R rear swinger on it

    • Book says to run 0 and that you (can) put air in if choosen