• Steven Chappell shared Outback Atv Park's event to the group: Honda 350x. — Honda 350x

    WHO'S READY!!!! Yahoooooo! For ONLY $40 everything is included. 4 days 3 nights! 6 bands! Concerts, mud races, vendors galore, and much more all for ONLY $40.

    April 6-9th. Outback Mudbash 2017!

    Get your tickets at the gate or online at www.ticketriver.com for fast pass gate entry. We will not sell out!

    Anyone with questions about our Outback Mud bash please contact me if you havent gotten a response from Mike Gipson or ConnieBabe Donnelly Gipson. We are taking about 50 calls an hour and more messages than they can get back to.

    This is going to be so much fun. Dont miss out.

    0 comments

    Photos from Derek Anding's post — Honda 350x

    I may have a small project on my hands. I picked her up today, the second two pictures are of the needle bearings I think inside the back end of the swing arm, if they're bearings I would like to know how to get them out and where to look to get them. Thank you also it's a 1986 I bought it for 600 bucks

    23 comments

    Photos from Mickey Dunlap's post — Honda 350x

    Next Friday will be the cut off time for the 83'-85' 200X/ 81'-82' 250r 2+4 Durablue axles that got put behind the 350x axles, so the 350xes are ready and the 200x/ 250r's will be done in a few weeks but I'm taking orders now. I still have to sell 10 to get a good price but because I lost money taking credit cards and pay pale last time the price will go up $10. So the 200x/ 250r is now $409 plus shipping and the 350x are $359 plus shipping. If you need a axle at the very best price get your orders in next week. This is the last time I'm going to do this so grab themup now!

    6 comments

    Photos from Jarrod Speicher's post — Honda 350x

    If anyone has a interest in a couple trikes on trade for their 350X or 250R message me pics please. I have a 1984 Yamaha 225DX super clean,trail ready. OEM Plastics Original bore. message me if interested.

    And a 1985 Honda 250ES OEM tank/front fender all new rear Maier Plastics never mounted in bags. Needs normal maintenance from sitting a few years in a old mans Garage. Rare plow and mounts go with it for the right trade offer.

    Bunch of new parts never mounted. I took carb off and old back plastics off that were bad. That's as far as I got no time for it. I'll potentially swap both machines and everything I got for them for a nice X or R trail rider only interested in clean. Pick up only Pittsburgh PA, area. 15021 on WV, line. Nothing is for sale at all.

    0 comments

    Steven Chappell shared Outback Atv Park's event to the group: Honda 350x. — Honda 350x

    LESS THAN 2 WEEKS BEFORE WE THROW THE BIGGEST BADDEST ADULT/ATV COMMUNITY PARTY ON THIS SIDE OF THE GLOBE!

    *OUTBACK MUDBASH 2017 - APRIL 6TH - 9TH 2017 - 4 DAYS 3 NIGHTS FOR ONLY $40!

    GET YOUR TICKETS AT WWW.TICKETRIVER.COM

    - SEARCH FOR "OUTBACK" OR PURCHASE AT THE GATE.

    THIS IS THE BIGGEST BADDEST NON-STOP 4 DAY MEGA EVENT OF 2017! THAT'S RIGHT EVERYTHING FOR ONLY $40!

    Like, Tag, and share this post with your friends so they dont miss out.

    Dont pay higher rates at other parks when $40 covers everything.

    *Whats included for only $40?

    Park admission with 1 bike for 4 days and 3 nights - with premitive camping included (Plenty of room for large group campers, and self contained RVs/Campers onsite).

    Entry into all events including Mud races! (*Newly renovated mud track- Now one of the best Mud tracks on the east coast).

    **2 nights of LIVE concerts featuring:

    Lenny Cooper

    Mike Eldreth Jr.

    Demun Jones Music

    BoonDock Kingz

    Moccasin Creek

    Moonshine Bandits

    And More...

    Come check out OUTBACK MX/ATV PARK in Laurinburg NC anytime. Open 365 days a year. Call Mike or ConnieBabe or go online for more details!

    #OUTBACKAPALOOSA2017 #YAHOOOOOO

    0 comments

    So today I took the 350x out and ran against a 300ex and it pulled on me in... — Honda 350x

    So today I took the 350x out and ran against a 300ex and it pulled on me in every gear. Only thing I had on it was when the 300 tapped out in 5th I still had a gear to go. I've recently been think it felt like the X was loosing power but was thinking maybe I was just getting to used to it. With a high comp wiseco piston and mild port with 400ex carb uni filter and a cobra header with HMF slip on. I used to be able to outrun 400ex. Now I'm getting outrun by a 300ex. We do suspect it is a 330 bigbore ex because it is a powerhouse compared to other 300s. But would a 330ex typically outrun my mild built 350x? Or is my motor wearing out already?

    14 comments

    I got a question I rebuilt the top end of my X this previous week has ran... — Honda 350x

    I got a question... I rebuilt the top end of my X this previous week, has ran great since. Got about 10 or 11 hours on it. And today when I was out riding, I was riding a wheelie down the road raised it to far and ended up flipping it. When I stood it back up it was locked solid. I could literally jump up and down on the kickstarter and it wouldn't budge, tried pulling the plug and that didn't help. I had a buddy tow me the 10 miles back to the house. The whole way home I left the plug out and kept trying to dump the clutch and get to spin over. It wouldn't budge at all. After we get to my house while it was still in gear we rolled it backwards like a foot or so and it came totally free. Reinstalled the plug and it fired and purred after a couple kicks.

    What would cause this?

    I am totally stumped, it went from froze solid to totally free after just rolling it backwards in gear a few inches. Glad it's okay, but highly confused.

    10 comments

    350x aftermarket exhaust — Honda 350x

    I have had this exhaust laying around for a long time, i believe it's a superflow brand. I ran it on my dad's bike for a while and it's not too loud. The metal is pitted from rust but we had it sand blasted years ago. As I looked it over I found a small pinhole (pic is included of that hole) there is also a slight dent on one of the head pipe tubes(pic also included). If you are tiered of the loud annoying dg or cobra but don't want stock I think this is a good route to try. It is also perfect for someone that wants a cool 80's look too. I'm thinking 200 shipped OBO!!!

    5 comments