• Photos from Jason Bell's post — Honda 420 Forum

    If anyone is looking to get one of my rad kits with custom colors now is the time to do so. I've got 8 bare kits going to powdercoat tomorrow. Can do any two colors you would like just get in touch with me.

    These kits fit any:

    2007+ Rancher 420

    2012+ Foreman 500

    2015+ Rubicon 500

    I have several Matte black Frame with red or black mesh currently in stock and ready to ship as well.

    Cost for these Kits is $250 Powdercoated and shipped to your door. For any color powder in stock.

    Kit includes new radiator hose and all the hardware to install.

    0 comments

    I have a stock 2015 DCT 4x4 Rancher and I was wondering could I run 26x10 12... — Honda 420 Forum

    I have a stock 2015 DCT 4x4 Rancher and I was wondering, could I run 26x10-12 mud lites and turn them fine? I do mostly trail riding, some hills and some mud and water. I know it's not a mud bike and the foot shift is preferred. I'm not doing snorkel and rad relocate cause I don't need it. I don't go super deep 24/7. Or should I just get 25x10-12 maxxis zillas? I would do 26x11-12 zillas all around but I don't think I could turn the 11" wides on front with its delta steel rims and not rub shocks. Any info would be appreciated. I don't really wanna do a gear reduction cause the DCT auto would pointless cause it wouldn't work. With the foot shift gears it would be ok but anything bigger would be no point and defeat the purpose of auto. No I don't wanna run 28" backs and say you along them. I know first hand you can't in thick mud

    6 comments

    Steven Chappell shared Outback Atv Park's event to the group: Honda 420 Club. — Honda 420 Forum

    LESS THAN 2 WEEKS BEFORE WE THROW THE BIGGEST BADDEST ADULT/ATV COMMUNITY PARTY ON THIS SIDE OF THE GLOBE!

    *OUTBACK MUDBASH 2017 - APRIL 6TH - 9TH 2017 - 4 DAYS 3 NIGHTS FOR ONLY $40!

    GET YOUR TICKETS AT WWW.TICKETRIVER.COM

    - SEARCH FOR "OUTBACK" OR PURCHASE AT THE GATE.

    THIS IS THE BIGGEST BADDEST NON-STOP 4 DAY MEGA EVENT OF 2017! THAT'S RIGHT EVERYTHING FOR ONLY $40!

    Like, Tag, and share this post with your friends so they dont miss out.

    Dont pay higher rates at other parks when $40 covers everything.

    *Whats included for only $40?

    Park admission with 1 bike for 4 days and 3 nights - with premitive camping included (Plenty of room for large group campers, and self contained RVs/Campers onsite).

    Entry into all events including Mud races! (*Newly renovated mud track- Now one of the best Mud tracks on the east coast).

    **2 nights of LIVE concerts featuring:

    Lenny Cooper

    Mike Eldreth Jr.

    Demun Jones Music

    BoonDock Kingz

    Moccasin Creek

    Moonshine Bandits

    And More...

    Come check out OUTBACK MX/ATV PARK in Laurinburg NC anytime. Open 365 days a year. Call Mike or ConnieBabe or go online for more details!

    #OUTBACKAPALOOSA2017 #YAHOOOOOO

    0 comments

    1998 Honda 300 4x4 — Honda 420 Forum

    Honda 300 4x4 has brand new front diff,still has stixkers on it,freshly rebuilt rear diff,kendas on sti rims all the way around smokes just a little bit when gassed hard. Looking to trade for a 2wd or 4wd 420.may sale for right offer.no junk.open to all offers.no guns

    1998 Honda 300 4x4

    $2,500 - Port Barre, LA (70577)

    Honda 300 4x4 has brand new front diff,still has stixkers on it,freshly rebuilt rear diff,kendas on sti rims all the way around smokes just a little bit when gassed hard. Looking to trade for a 2wd or 4wd 420.may sale for right offer.no junk.open to all offers.no guns

    0 comments

    2008 brute force 750 — Honda 420 Forum

    Selling the wife's ride, possibly trade but other unit must be automatic. Comes with SS wheels, mud lite XTR tires, penland exhaust, jetted, k&n. Not snorkeled, never drowned, clean bike. Selling cause it's a little to much for her. Open to trades. 254-654-7711 thanks

    2008 brute force 750

    $4,000 - Lott, TX (76656)

    Selling the wife's ride, possibly trade but other unit must be automatic. Comes with SS wheels, mud lite XTR tires, penland exhaust, jetted, k&n. Not snorkeled, never drowned, clean bike. Selling cause it's a little to much for her. Open to trades. 254-654-7711 thanks

    0 comments

    RJWC — Honda 420 Forum

    Full system RJWC exhaust. Fits 2014+ foreman 500 and 2014+ 420 straight axle. 400 bucks. Will include a hmf optimizer for 100 extra but you will need to buy the o2 delete(30 bucks from dynojet) located in west Monroe Louisiana. Will ship on buyers dime.

    RJWC

    $500 - West Monroe, LA (71291)

    Full system RJWC exhaust. Fits 2014+ foreman 500 and 2014+ 420 straight axle. 400 bucks. Will include a hmf optimizer for 100 extra but you will need to buy the o2 delete(30 bucks from dynojet) located in west Monroe Louisiana. Will ship on buyers dime.

    1 comments

    212cc Drift Trike — Honda 420 Forum

    212cc drift trike somewhere around 12-20 hp this thing is very very fast and fun. Has a L&J karting clone model racing go-kart motor ($900 new, stock ) my motor is not stock. These things are crazy fun and I have plenty of extra parts to go with it. $1000 OBO or trade for 31" outlaws. 601-618-0136

    212cc Drift Trike

    $1,000 - Summit, MS (39666)

    212cc drift trike somewhere around 12-20 hp this thing is very very fast and fun. Has a L&J karting clone model racing go-kart motor ($900 new, stock ) my motor is not stock. These things are crazy fun and I have plenty of extra parts to go with it. $1000 OBO or trade for 31" outlaws. 601-618-0136

    2 comments

    grizzly 450 2007 — Honda 420 Forum

    30' monster mayhems

    Xd wheels

    2' lift hd tie rods

    Light bar on front and back and cubes in the headlights

    Snorkeled

    Radiator relocate

    Hmf performance series

    Greaseless clutch

    Gates hd belt

    Rebuilt with high wisco piston

    Uni air filer

    Dynojet kit

    New bearings ball joints and tie rod ends

    Im sure im missing something

    Open to trades

    grizzly 450 2007

    $4,000 - Prairieville, LA (70769)

    30' monster mayhems

    Xd wheels

    2' lift hd tie rods

    Light bar on front and back and cubes in the headlights

    Snorkeled

    Radiator relocate

    Hmf performance series

    Greaseless clutch

    Gates hd belt

    Rebuilt with high wisco piston

    Uni air filer

    Dynojet kit

    New bearings ball joints and tie rod ends

    Im sure im missing something

    Open to trades

    4 comments

    Alright guys we re coming up on April 20th quickly and as most of you probably... — Honda 420 Forum

    Alright guys, we're coming up on April 20th quickly and as most of you probably know that's national marijuana day. With the numbers 420 in our group name, it seems like almost 90% of the people wanting to be added are the "weed" people. I have been getting group request off the walls and it's hard to pick and choose the people who are wanting to get added in the group to post about marijuana out of all the rest of us who want to be added for the real reason this group was made.

    I am not perfect and no I do not always have time to rummage through people's profiles to see if they are wanting to get added for marijuana reasons, so sometimes they do get added.

    If y'all could help me out a tad and report the post that have anything to do about it I'd appreciate it very much!

    Everyone have a blessed day!

    0 comments

    2003 Honda Rancher Parts And Parts Bike

    Located in Commerce Tx

    Everything you see goes.

    Shoot me offers on anything. I will remove *SOME* parts for you if I have to.

    *EVERYTHING IS OBO*

    *WILL SHIP ONLY "SMALL" PARTS*

    *SHIPPING AT YOUR COST*

    *PAYPAL IS ACCEPTABLE*

    -Rear Differential $100

    -Swingarm $40

    -Rear Axle $50

    -Plastics $40 obo (pretty worn and cracked in some spots)

    -Seat $30

    -Metal Racks/front guard [$100 for all of them] or [$40 for each]

    -Gas tank ($40)

    -The Frame And Motor is in okay condition. Motor has a small oil leak by front drive shaft. I wanna give the benefit of the doubt it'll start. Carb has been covered and it has been garage kept. $300

    I'll let everything go for $500 obo

    Or take parts off at your cost.

    NEED IT GONE

    2 comments

    Photos from Jason Bell's post

    I've got mesh radiator kits powdercoated ready to ship next day. These kits are meant for eBay but will give you guys a shot a bit cheaper first.

    Frames are powdercoated matte black with your choice of gloss Red White or Black mesh. I have one of each color mesh so first come first serve.

    Price includes all hardware to mount new hoses and trackable and insured 3 day shipping to your door!

    This batch is $250 for you guys until they are gone!

    These will fit any year 420 12+ Foreman,s and 15+ Rubicon's. Just tell me what machine so I can get you the right hardware.

    These are the colors I have in stock. Custom colors and combos are no problem just have to wait for them!

    9 comments

    2003 honda rancher parts bike

    Located in Commerce Tx

    Everything you see goes.

    Shoot me offers on anything. I will remove *SOME* parts for you if I have to.

    *EVERYTHING IS OBO*

    *WILL SHIP ONLY "SMALL" PARTS*

    *SHIPPING AT YOUR COST*

    *PAYPAL IS ACCEPTABLE*

    -Rear Differential $100

    -Swingarm $40

    -Rear Axle $50

    -Plastics $40 obo (pretty worn and cracked in some spots)

    -Seat $30

    -Metal Racks/front guard [$100 for all of them] or [$40 for each]

    -Gas tank ($40)

    -The Frame And Motor is in okay condition. Motor has a small oil leak by front drive shaft. I wanna give the benefit of the doubt it'll start. Carb has been covered and it has been garage kept. $300

    I'll let everything go for $500 obo

    Or take parts off at your cost.

    5 comments

    iso — Honda 420 Forum

    Does anyone know where I can get a new drive shaft joint or know of a stronger one to replace the stock one?

    Thanks in advance!

    Does anyone know where I can get a new drive shaft joint or know of a stronger one to replace the stock one?

    Thanks in advance!

    14 comments

    08 420 — Honda 420 Forum

    08 420 gonna do a 2" lift and 3" stretch but also need 2 3" wheel spacers who makes and sells them

    08 420 gonna do a 2" lift and 3" stretch but also need 2 3" wheel spacers who makes and sells them

    22 comments

    Hunting rack with LED lights — Honda 420 Forum

    This Hunting rack came off of a Honda Rancher, but im pretty sure it will mount onto the front of any atv, i do have the bolts to mount it as well. It comes with two LED light pods that you see in the picture and i know for a fact that they both work. Also comes with the gun rack that you see on it in the picture. My phone number is 318-717-5568

    Hunting rack with LED lights

    $100 - Bunkie, LA (71322)

    This Hunting rack came off of a Honda Rancher, but im pretty sure it will mount onto the front of any atv, i do have the bolts to mount it as well. It comes with two LED light pods that you see in the picture and i know for a fact that they both work. Also comes with the gun rack that you see on it in the picture. My phone number is 318-717-5568

    3 comments

    mega mayhams — Honda 420 Forum

    Looking for some 28x14 or 27x14 mayhams, perfure to be tires and rims. Drop pics below or pm me(Pfa)

    Looking for some 28x14 or 27x14 mayhams, perfure to be tires and rims. Drop pics below or pm me(Pfa)

    4 comments

    ? — Honda 420 Forum

    Have any body ever had problems out of there Honda 420

    Have any body ever had problems out of there Honda 420

    32 comments

    2013 420 trade or sale — Honda 420 Forum

    2013 honda 420 rancher

    Hmf with fuel programmer

    3" streach 2" lift from don Oglesby

    28" ol 2 on msa kore wheels

    Has a snorkle

    Lightbar

    2013 420 trade or sale

    $4,000 - Pickens, AR (71662)

    2013 honda 420 rancher

    Hmf with fuel programmer

    3" streach 2" lift from don Oglesby

    28" ol 2 on msa kore wheels

    Has a snorkle

    Lightbar

    1 comments

    Nothing — Honda 420 Forum

    Why do yall think my bike is reving out in 1st gear in the mud like really easy.

    The bike can't pass anymore because it revs out to easy.

    I'm thinking spark plug weak.

    Nothing

    $1 - St Martinville, LA (70582)

    Why do yall think my bike is reving out in 1st gear in the mud like really easy.

    The bike can't pass anymore because it revs out to easy.

    I'm thinking spark plug weak.

    9 comments

    32x10x14 Silverbacks. — Honda 420 Forum

    32x10x14 silverbacks on 14 inch MSA rims. 4/110 bolt pattern. All 4 rims are SRA offset. Great thread as seen from pictures. Located in west Monroe Louisiana. NO TRADES. 700obo.

    1 comments

    anyone parting out a 14 or up 420? — Honda 420 Forum

    In need of some 14-up 420 rancher parts. Willing to buy entire parts bike for the right price.

    anyone parting out a 14 or up 420?

    FREE - Bogue Chitto, MS (39629)

    In need of some 14-up 420 rancher parts. Willing to buy entire parts bike for the right price.

    0 comments

    NEED HELP — Honda 420 Forum

    I have a 2011 420 that has some sort of electrical problem. When you turn the key everything acts like it low on power like if the battery would be dead , fuel pump can't run light on dash barley on ect. Now its a brand new battery all the terminals are cleaned. If I jump the started solenid the starter turns over strong, but the ground goes directly to the starter. Then to the frame ... does anyone in here know anything else to check I exhausted everything I know... Could it be a rely or a loose connection in the harness?

    3 comments

    Rancher 420 Rear Diff — Honda 420 Forum

    Came off a 08 420. Had one ride. 250 located in Calhoun Louisiana.

    Rancher 420 Rear Diff

    $250 - West Monroe, LA (71291)

    Came off a 08 420. Had one ride. 250 located in Calhoun Louisiana.

    4 comments

    2011 Honda 420 — Honda 420 Forum

    The bike is really not free

    Not seeking or trading for nothing except for a nice Lil or BIG truck

    The bike has

    Hmf

    Rad relocation

    H.I.D'S

    Snorkel

    Hand grips

    2inch lift in front new rear drive shafts in back

    And one new bearing in rear end

    35% gr with clutches

    Needs

    Smokes

    Front lower ball joints

    One cv axle

    And the rear end bearings

    12 comments

    . — Honda 420 Forum

    Anyway ideas of what I should do to it

    .

    FREE - Mangham, LA (71259)

    Anyway ideas of what I should do to it

    3 comments