Street Legal Crf230f clean Title — Honda bobbers

netboard

I have a 05 crf230f that I have converted into a street legal monster. The bike has a full light kit (hi-lo beam, led tail light/brake light , blinkers), horn, and dot approved knobby tires. I recently had the bike inspected and registered so there is still a fill year on the tags. This is an awesome bike to crude around town and jump off and hit some trails.... the bike runs great and is electric start so no kicking. I recently went thru the carb and replace everything. Also put a new filter on. Don't really need to sell it just trying to see what I can get. Also looking to trade for a crf450 or any other 450 dirt bike. Lmk what you got..2500 obo

Street Legal Crf230f clean Title

$2,500 - Conroe, TX

I have a 05 crf230f that I have converted into a street legal monster. The bike has a full light kit (hi-lo beam, led tail light/brake light , blinkers), horn, and dot approved knobby tires. I recently had the bike inspected and registered so there is still a fill year on the tags. This is an awesome bike to crude around town and jump off and hit some trails.... the bike runs great and is electric start so no kicking. I recently went thru the carb and replace everything. Also put a new filter on. Don't really need to sell it just trying to see what I can get. Also looking to trade for a crf450 or any other 450 dirt bike. Lmk what you got..2500 obo

%d comments

Alrighty another fun filled question about my money pit Haha I ve got the... — Honda bobbers

Alrighty another fun filled question about my money pit. Haha I've got the velocity stacks and open exhaust and appropriate jetting for such mods. New issue is that it's spitting fuel from 1 pipe. Thought maybe condensation from what I've read on line but it is indeed fuel as it caught on fire. No harm it went out right away. Did some research and was suggested that it's the float valves I've ordered new ones and should be here today. Does this sound like I'm on the right track? Anyone else have this issue and what was your fix? Thanks PFA

%d comments

    Okay so I have this 1995 vlx 600 this thing has been nothing but a headache for... — Honda bobbers

    Okay so I have this 1995 vlx 600 this thing has been nothing but a headache for me since day one. I bought the bike it needed carbs I bought the carb second-hand allegedly ready to run. Well that was not the case I struggled for months to figure out why it wouldnt start yada yada yada and I realize I needed air fuel mixture screws. well when I bought those I went ahead and bought the velocity Stacks and the jet kit great everything's great. I got it up and running but now it seems like the bike will go into gear and shifts fine but once I hit like the top speed it just kind of won't go anymore and I know it really should so it's very slow to accelerate any ideas also I'm stripping the carbs right now as I'm writing this and I just now realize that one needle is actually skinnier and pointier then other needle is that a problem? Also I went to start it before tearing down and it appeared to spit fuel from the pipe.

    Only mods to the bike are velocity stacks and jets kit and chopped pipes/ open exhaust

    %d comments

      I have an 83 shadow 750 When I try to start it the starter barely moves the... — Honda bobbers

      I have an 83 shadow 750.. When I try to start it, the starter barely moves the engine. It also makes a strained squelching sound.. Almost like it's trying to turn , but something is stopping it.

      I just redid whole harness. New battery. Pulled starter out and checked it over. It was fine and spins good out of motor.. I raised back tire and put in 6th, and spun tire. Hard to spin.. But will move and can hear pistons moving..so engine ain't locked up..

      Anybody have any ideas or tricks that will pinpoint problem, w/o me havin to tear engine apart?

      I also hit starter w power direct.. Same.. It'll barely move, if at all.

      %d comments

        Honda VT 600 - ASC AH BOBBER - CUSTOMBIKE - CHOPPER — Honda bobbers

        ASC AH BOBBER- NEUAUFBAU 2016 UND CUSTOMIZED -- KUPPLUNG + GASSZUG NEU - KERZEN, ÖLE UND KÜHLFLÜSSIGKEIT NEU - VERGASER CUSTOMIZED MIT ASC AIRFILTERN - TÜV UND ALLE EINTRAGUNGEN . DAS BIKE IST GEBAUT WORDEN MIT - ASC RAHMENÄNDERUNG - 1 SITZER MIT MITSCHWINGENDEM STAHLHECKFENDER - SCHWARZGLANZ LACKIERT UND ASC RAHMENCOVERN - SHINYO 3 IN 1 HINTEN - ASC SEITLICHER KENNZEICHENHALTER - CUSTOM SITZ - 9 LITER TANK - MOTOR GLANZSCHWARZ LACKIERT - ORGINAL PIPES MIT ASC SOUND CUSTOMIZING - SCHWARZGLANZ PULVERBESCHICHTET – HINTERRAD 170 / 80 / 15 ME 880 AUF 3.5 X 15 SPEICHENFELGE - SCHWARZGLANZ PULVERBESCHICHTET - TIEFERGELEGTES FEDERBEIN - VORDERRAD 100 / 90 / 19 ME 880 AUF 2.15 X 19 SPEICHENFELGE -SCHWARZGLANZ PULVERBESCHICHTET - GEÄNDERTE GABELFEDERN – MIT ASC GABELCOVERN - HD STREETBOB APEHANGER MIT LENKERENDENBLINKER KELLERMANN BL 1000 + LSL RISER - CUSTOMCHROME GRIFFE - ASC CUSTOM SPIEGEL – ORGINAL FRONTLIGHT SCHWARZGLANZ PULVERBESCHICHTET - SIGMA DIGITACHO - ACHTUNG!!! BEI INTERESSE - BITTE PN - TÄGLICH VON 1200 - 2200 UHR - DAS WÄRE ES VON MIR - ZUGREIFEN UND AB AUF DIE STRASSE

        %d comments

          Photos from Jacob Everett's post — Honda bobbers

          Hey guys, it's been a while since working on this 85 vt700c that my buddy wrecked a year ago. Now trying to put it all back together but I have no clue what these wires connect to. I don't see anything they plug into.

          Sorry if this sounds stupid, I just haven't touched this bike in a while and I lost my notes and pics I took when disassembling it.

          Any help or advice would be appreciated. Trying to get it going to sell it. Into supermotos now. Thanks.

          (If anyone is in or near Sacramento, CA and want to buy it off me for 1k I have hella upgrade parts for it and it's almost back together.)

          %d comments

            Well some of you will remember Patience built bout 4yrs ago Getting her ready... — Honda bobbers

            Well, some of you will remember "Patience", built bout 4yrs ago. Getting her ready for the season here. When I built her I ditched the airbox for pods. After a few yrs of riding, I'm constantly having to re-seat the carbs because it being a hardtail now, I'm thinking it vibrates the carbs loose from boots over time. Tired of doing this repeatedly. Apparently the airbox supported the carbs and now the only support they have is the boots and throttle cables, which ain't gonna cut it. Anyone ever have this prob?, and anything suggestions on fixing. Please...no smart-ass comments like "put the box back on". Way past that point. Thanks guys. Have a safe day.

            %d comments

              Please remove if no allowed — Honda bobbers

              Please remove if no allowed............................

              I'm in desperate need of some help/advice.

              I haven't rode in about 4 months, today I went to go for a ride and she wouldn't start so I went out and bought a brand new battery. I put it in and she started right up, as soon as I went to adjust the choke I can see gas spilling from behind the lil cap that's there next to the choke and I have no clue what to do.. can someone plz point me in the right direction, thanks a million in advance.

              Ps. It's no leaking from the hose, it's coming out of the bottom.

              %d comments

                Cb 650 Project W A Bunch Of Odd Stuff To Get It Together — Honda bobbers

                I had some ideas in mind for where this was going to go. The engine runs good but the wirings yanked out of it right now and there's no battery. I guarantee it runs I parked it last summer. I had bought a different Hardtail frame to throw everything on but I was given a better offer for it out right so I sold it.I have a padded seat pan with the parts and would be willing to do a custom leather work for whoever decided to take this project.there is no title for it right now but I can get one. It is not stolen it's just been sitting after somebody else hobbled it together. I rode it a couple times before dismantling the mess that it was. Best offer takes it I just need the room back in my garage

                %d comments

                  1977 GL1000 — Honda bobbers

                  Make me an offer. Needs just about everything done to it, but the engine runs and it has real good bones. Great project for someone who has the time & energy. Also have a Corbin Cafe Racer seat, and 4 Lester Mags.

                  %d comments

                    cb650 project — Honda bobbers

                    Picked this up about a year ago and it ran great even though there was a ton of stuff cobbled together.It was a fun fast and nimble death trap when I parked it. I'm out of space in my garage and I have a bunch of stuff to go with it...including a full seat and a solo seat pan,handle bars and brand new chrome levers /controls .I had a different frame it was all gonna go in but got a good offer for it. Best offer takes it . No title I want to keep the front wheel and fishtail exhaust extensions.

                    cb650 project

                    FREE - Milwaukee, WI (53222)

                    Picked this up about a year ago and it ran great even though there was a ton of stuff cobbled together.It was a fun fast and nimble death trap when I parked it. I'm out of space in my garage and I have a bunch of stuff to go with it...including a full seat and a solo seat pan,handle bars and brand new chrome levers /controls .I had a different frame it was all gonna go in but got a good offer for it. Best offer takes it . No title I want to keep the front wheel and fishtail exhaust extensions.

                    %d comments

                      1973 Honda CB750 title and pre 1978 CB750 carbureators and 77' k model seat sissy bar and grab bar — Honda bobbers

                      Carbs are 70.00 shipped for the 77's, 100.00 shipped on the roundtops and the title is 100.00 and no I won't take less. The carbs need a cursory cleaning but look to be great candidates internally. Title is an Indiana clean and open 1973. If someone needs more than one set of carbs I will do a discount. 1977 CB750 seat, sissy bar and grab bar combo is 100.00 shipped. Need this stuff gone. Thanks for looking.

                      %d comments

                        Unknown hardtail — Honda bobbers

                        Unknown hardtail I don't who made it or what it is bike it ismade for. My best guess is it is for a metric bike maybe a in-line 4 not sure here's some pics with measurements, let me know if you need any more pics, info, or measurements

                        %d comments

                          Adam Aarons shared a link to the group: Honda bobbers. — Honda bobbers

                          1st February 2017 not sue if you chaps ride in the rain. Welcome to Rainpal the world's sleekest wiper to fit your existing visor. The only way to enjoy similar clear vision through your visor like a car's windscreen is with a wiper system. Rainpal will provide riders with a choice if they want to have this clear vision or manage with rain repellents which have limited use in slow traffic in large cities, or in removing road grime, drizzle, fog, mist compared to Rainpal with it's optional water sprayer. Glove wipers can be dangerous especially if you have your left hand on your visor when a car pulls out of a side turning. Rainpal's Bluetooth control will enable control of Rainpal via your left thumb, see our FAQ section for more details -

                          %d comments

                            1974 Honda CB750 Amen Hardtail Bobber — Honda bobbers

                            I'm done with it. I've got too many projects and others I would rather work on. What we have here is a clean 74 titled single cam CB750 Amen hardtail that is almost complete. what you see is what you get, but here's a partial list of what comes with it;

                            engine with approx. 4,000 miles since last rebuild

                            hardtail frame with original oil tank/battery compartment

                            drag bars

                            brembo master cyl

                            new SS brake line

                            new 2" over front fork tubes

                            new billet fork brace

                            stock '78 CB750 SS fork brace

                            new tapered neck bearings

                            new front brake pads

                            new springer seat

                            new tires (both 2015 date code)

                            aluminum rims with stainless spokes

                            dyna ignition with aftermarket coils

                            new fork seals installed

                            new exhaust studs installed

                            %d comments

                              Saw Blade Knife! — Honda bobbers

                              $75 obo/. Don't be shy!

                              This is one of my Saw Blade Knives. I have others. Hand forged and hammered from an old saw blade. Tempered, hardened and edged. Sharp as hell. Hickory handle sealed with minwax stain and poly. Don't waste your money of junk. Buy handmade!!!

                              %d comments

                                I got a cb650 and a shadow I got for parts. complete bike except maybe a coil — Honda bobbers

                                I got a cb650 and a shadow I got for parts(complete bike except maybe a coil) cb has been hardtailed but still needs some welds cleaned up, paint and wiring finished...2 bikes with titles (I understand can't ride home) but got a guy interested...what are they worth? Just looking not trying to screw anybody. But between 3 kids and work is exploding and a truck I need parts for and $ to tag I don't have time to deal with it...I'm in sw missouri

                                %d comments

                                  Photos from Chubbs Gane's post — Honda bobbers

                                  Question guys just got a Honda shadow vt1100 came out this morn left the gas on last night it was pouring out this morning replaced the in line fuel filter fixed that looked down and this was empty and cracked to hell trying to take it off ended up putting my finger straight threw it I'm positive it's the coolant reservoir my question is can I make one easily or better to replace with a new one ? Thanks in advance

                                  %d comments

                                    VLX 600 Hardtail kit — Honda bobbers

                                    Weld on hardtail kit for VLX 600. Came with my bike when I bought it and I have no desire to use it.

                                    $75 obo plus shipping

                                    Weld on hardtail kit for VLX 600. Came with my bike when I bought it and I have no desire to use it.

                                    $75 obo plus shipping

                                    %d comments

                                      Boys and girls I have a question for you all — Honda bobbers

                                      Boys and girls, I have a question for you all.

                                      I have just made a complete new wiring loom on by bobber build and all seems to be fine, lights, indicators brake light etc all working. I've not tried to start the bike yet as its not complete but it does turn over.

                                      One thing that does happen is that the bike turns over with the run/kill switch in the off position. I've tried 2 different switch gear units and they are the same. Does the standard wiring loom do this? its a 1980 CB750

                                      I thought it was worth checking before unwiring and looking for issues

                                      %d comments

                                        Photos from Erik Tuss's post — Honda bobbers

                                        I know most bobbers don't like high tech new colored gauges, but the Koso stuff is a nice. I recently came across an amazing deal for a Koso RX2-GP gauge. These are 300+ dollar gauges this guy is letting go much much cheaper. If you Aten interested, let me know and I'll give you his FB name and that $95 (already awesome price) is more like $50.

                                        This is not bullshit. Just sharing a great deal I came across. I do not make a thing out of this.

                                        %d comments

                                          Frisco sporty tank — Honda bobbers

                                          For sale

                                          Chopper/Frisco sporty tank

                                          Candy red powder with pinstripes by Joel @ image1

                                          Stainless cap

                                          No fuel gauge or petcocks

                                          $275shipped its new never had gas in it had it done for a chop I was building and never finish. All tank mods where done by Daniel at pandemonium custom choppers.

                                          %d comments

                                            Is anyone selling rebuilt carbs for a DOHC CB750 I am looking at 500 in my... — Honda bobbers

                                            Is anyone selling rebuilt carbs for a DOHC CB750??? I am looking at $500+ in my area to get them professionally rebuild. And being a bobber guy i dont wanna dish out money if i aint gotta lol. But i also dont have the schedule to do it myself. Is this a fair price? Could i get some cheaper? I have individual air filters and straight 4-4 exhaust. Thanks!

                                            %d comments

                                              10" extended cables for cb750 — Honda bobbers

                                              Extended cables for a cb750 single overhead, 2 throttles, clutch and small brake hose. No trades and shipping included

                                              10" extended cables for cb750

                                              $75 - El Paso, TX (79903)

                                              Extended cables for a cb750 single overhead, 2 throttles, clutch and small brake hose. No trades and shipping included

                                              %d comments

                                                16 inch rear 5 spoke invader for cb 750 — Honda bobbers

                                                netboard

                                                Well folks...sadly as the story goes sometimes when dealing with online purchases....i got burned a lil when buying this wheel as the description n pics weren't of the actual condition of wheel so...trying to get some money back....the wheel is in good condition structure wise n bearings seem tight...needs to be rechromed and has a couple small gouges in it.....price is obo....rather deal with someone close to northeast pa but if not shipping is totally on the buyer....if u send me a pm please comment on this post that you did so

                                                %d comments