my cd100 1999 model,,,,,,, restored 1985 luk
What do you like more, the bike or .......?
my cd100 1999 model,,,,,,, restored 1985 luk
Nice work there, but EXCEPT stickers...Nothing is of 1985 LOOKS :-)....here is the list ..1) Front Mudguard -1990, 2) rear Swinging arm is latest...3) Rear Mudguard is also of 1989 & up.....This particular RED is too loud than the Factory red..<> Any way No offense , please keep away from RAILWAY tracks ,they are meant for trains alone...not for Photo shoot !! ;-)
What do you like more, the bike or .......?
The Dutch Cam Chain Tensioner Disaster
I put a set of head light bulbs in my 86 350x I took out of a wrecked 4 wheeler as soon as I kicked it she started and I turned the switch on they lit up really bright and blew just as fast as they came on. Any ideas?
Sounds like your stator is bad.
With it running, probe the bulb sockets with a voltmeter. See what the voltage is. You will just waist money while blowing all your bulbs. The voltage shouldn't go much above 12. Rev the engine and the voltage should not increase. When my regulator was bad I was reading about 30 volts I think.
Finger prints and oils on the bulb?
Planning a run to the Virginia Coast on the 17th to see a Rocket launch from Wallops Island.. they say it might have more rumble then my pipes.
Anyone is welcome to join
Hey everyone, this is a link to my business page. Not soliciting, just letting you know.
Have a question . How often do you get your valves checked when you get your cycle serviced every 4,000 miles every other or what?
I was referring to the E-85 blend sold here in the states. I never said premium didn't have ethanol in it ( although your post brings up a good point, in that I need to check how much ethanol is in our premium in Indiana) I do know that premium burns cleaner and hotter and is recommended for my subaru sti. So I therefore I assume it would be better for a smaller engine type ( such as the Honda motorcycle engine) Wow this topic is so off course, sorry OP. Valve adjustment=good.
Non-ethanol stations are hard to find, and it costs more, but some stations that sell ethanol have non-ethanol premium. Like buying healthy food ya gotta read labels.
Anybody know where the best place(cheapest) to find sets of cables for 14" ape hangers on an aero?
spark plug torque specs? Does anybody have an idea what they are?
Sneak peak. New paintjob
may be usefull; manual for our bikes http://tinyurl.com/ScootGeekVT 1100Manual
It says it's for Spirits. Are they the same as an Aero?
I'm not sure. A lot of things looks the same. If you check the file there's a difference between some versions of the VT1100
No there not
Hah, thanks to this paperweight of a computer, I can't even open it anyway. I could throw this thing farther than I trust it.
Cem tv ,ve cem radyoyu cihazlarımdan ve hayatımsan sileli 5 gün oluyor.
Go round and pay him a visit :-;
Seeing a big fooker like you on the door step should make the nob stick to the agreement
thats a dirty trick, Lloydie's right, go cast your shadow over the twat (y)
How much it cost? I could make such a single seat pan. Not in carbon but fibrrglass. The one on the pic, is it straight fit?
No riding today.
Scary!...86 here today but working...
that's a shame to let her stay out like that..
Baby it's cold outside.
weather got bad in north eastern Ontario on Friday April 19th, power outages and pictures like this! too bad your bike was left outside, many trees down due to the wet freezing rain ~
See, here I go already. I know there has to be a button for the trip readout to reset it... Any ideas where? My last ride was an 88 HD with no guages. :)
Hi, there! Thanks for letting me join. Just got a 98 Aero 1100. Damn pretty, but it's still too snowy up here in MN to ride. So I figure that will give me some time to get acquainted with it. Some small issues, nothing major. I hope to not to have to ask questions, but if I do, I hope someone here would be able to help. Thanks!
Here is a pic of my bike before we left for CO last year on a week trip down the eastern side of the Rockies.
Hey guys, I'm new to the group. I hope you guys have all had time this spring to do some riding. I live in NE and the weather so far has been less than great, but of course I have been able to sneak in a few hours. I had a tech question I hope one of you can answer? I own a 05 shadow aero the 750c. I was getting the bike all squared away for this summer and that included putting on some new plugs and for the life of me I can not find any torque specs anywhere. Does anybody know what the specs are for my bike? I know what the manual says about the 1/2 turn once seated, I do not like this method. I would rather have a spec to work with. Thanks
my journey...only 65 miles but awesome scenery!!!
I'm looking for some hard bags to fit my 2006. My shadow is candy apple red. Any ideas.
I chose National Cycle Cruiseliner bags with the turn signal pockets for ease of installation. Any good paint shop can paint them to match your bike. Or look at some of the custom Harley bags if you're talented enough to build your own mounts. Some on here have done an awesome job mounting big bags on their Aero's.
Can you name the rider?
Anyone want to do a 500 mile butt buster on a weekend from VA and circling some of the craziest backwoods roads of West Virginia. Will probably encounter Banjos.
Never seen firestorm like this before :)
And an other 5 engines and 2 bikes saved for Club Permit scheme in Melbourne and the CCJMC RHonda Trek
another pair saved to day by club members
i deleted the guy that kept posting advertisments/spam carry on peeps
I'm trying to find the torque settings for my big end bearings, the clymer manual doesn't have it from what I can see, neither does my service manual and this one on page 7 has torque settings but none for big end. Would the standard bolts underneath be the setting? Or can someone tell me what the setting is? I can't find it online anywhere
Hi Glenn which bolts are you looking for the torque settings for? As far as I know the con rod on ct is one piece and the bearing, crank pin and fly wheels are pressed in to place as are the bearings in the cases. Post some pics if you can.
I haven't got it apart yet, just assumed.
is it a tricky job? I've lined up the loan of a tool so I could do it myself, assuming it was not a sealed unit, I fear this is going to cost me 400 bucks in labor now
I couldn't tell you for sure but splitting the cases and replacing the bearings is pretty straight forward (a bit tough the first time but a big ego boost when you have done it ;) ) and I would think you would be able to buy an already set up crank pretty cheap which is an easy install.
I bought the new rod/bearing from oneten, not sure what to expect when it gets here but I thought I had the job sussed but all of a sudden I get thrown a curveball and now I have to reassess.
Thanks for the help
Here's a question for you guys....got a 97 storm running a dynojet kit, k+N and Simmi cans. When ime riding it slowly..maybe revs are around 2500_3000 rpm the bike coughs a couple of times as if it doesnt like being in that rev range, doesn't do it all the time tho..............any ideas? Carbs need a set up, check jet??.......
threaded my sump plug. Dang.
The kit should be about $30, here is a guide that might help: http://www.wenga.net/ellingly/ posties/timesert.html
Looking to add a fuel gauge to my 05 Shadow Aero. I'm a noob, any suggestions? I'm in Ontario.
Finally done with the install, wash up, and ready to roll...
First nice weekend all year and just got bike out of storage yesterday. A few small tune-up things to do, tire pressure, fresh gas, and I'm off for a day of riding tomorrow! Can't wait!
Mine will be patrolling the Northern part of Indiana, you cover the center. Now we just need someone down south...
I know some Honda riders riding in the Bloomington area on sat. Aero Squadron, form up! Lol!
Just a thought, how cool would it be to have some vintage "nose" art from WWII fighters on my tank? Possibly the shark jaws from the Flying Tigers....
You're lucky ! I have still a bloody winter, so my Aero has to sleep yet.
I'm so jealous, we have a lot of sand and salt on the roads here in Ontario.. Plus flurries today %#^!!!
Last Fall one of the regulars here had a mystery oil leak she was trying to diagnose. I have since developed the same leak. Apparently it it common to our bikes. I have attached a link just in case she is still having this problem.
Has anyone fitted handguards to their Postie? What sort?
Girls just want to have fun too.
Do I spend 450 getting a new bottom end on my postie, or buy a lifan 140 kit off ebay for 500 (apparently it comes with the clutch, carby, chain and sprockets etc)
Considering I think it was the six months of 80km's an hour to work and back that did this I'm leaning towards the lifan, but two questions come to mind.
How hard will this be if the kit is complete?
Will it be LAMS compliant? I'm on my L's and don't want to compromise anything
I was kinda thinking that, stuff the blue slip. But I don't have the time to wait for custom mounts and exhaust bracket from the states so I'll just change the big ends.
i have some mounts i never used. they might have a bit of surface rust on them, but you can have em for what they cost me.
I've put a 160 in my 09 model and it is frickin awesome.
Anyone know where I can get wide white walls for a 2004 aero 750?
or good info on what size ape hangers to get?
Is this a page for CT110 enthusiasts or a mailing list for advertisements by a mcycle parts retailer?
If I want to join the later I will, if not, enough of the ads already!
Motorcycle's always been in my family's blood.
URUBICI - SC - BRAZIL. VIAGEM NA SERRA CATARINENSE. SÃO JOAQUIM, URUBICI E SERRA DO RIO DO RASTRO.
I wont say what I paid for these.....but oh my Im happy about it.
For their brand. These are HD OE bags and rails. I saw the ones you are talking about. Im sure they are good bags too. Are you interested in the older bags I have? Will be down your way in a few days.
I dont have hardware for them. They are old and a little rough, so they will need your attention, and they are fiberglass. They are about the same depth as my new ones, just more narrow. Same style though. There is a pic of them above these I think.
i was wrong, pic is under this post, down a few
It's time for a new battery, been putting it off for over a year. Any recomendations? Just looked on -bay, too much choice do I pay 35 or 45 pounds? Are the more expencive jobbies better?
Just picked up my 2012 Honda Shadow Aero from Riverside Honda!
I had highway bars, light bar, saddle bags, tach, tall backrest and wind shield installed before I picked it up.
So far today, with these Edmonton road conditions, I've put on about 100 km; looking forward to warmer weather and clearer roads ahead! ;)
So happy to finally own this great bike!
It didn't happen without pics!
Need to wait for nicer weather and a clean bike again before any pics are posted! ;)
Looks like we may be able to ride this weekend. I'll take pics too as I changed the seat to a single Ultimate seat, added saddlebags, floorboards, windshield, chrome rad cover, chrome horn, flamed chrome mirrors, GPS and am awaiting the chrome fender tip to be added
Where it should always begin.
This attachment may have been removed or the person who shared it may not have permission to share it with you.