Hands up who Had one. I did and wouldn t mind stumbling across one again — Honda Rebel 125 250 450

netboard

Hands up who Had one? I did and wouldn't mind stumbling across one again

%d comments
  • It was a fun little bike.

  • I know where one of these is how much are they worth

  • http://www.bikefinds.com/honda-z50-for-sale. Prices really vary. I saw one close to me for 350 but it's rough looking. Sent a message and offered him

    200

Hi all worth checking the silver screw above the handle and the bolt underneath — Honda Forza 125 Forum UK

Hi all, worth checking the silver screw above the handle and the bolt underneath. Mine fell off recently and it appears it has on others too.

And yes my bike does need a clean!!

%d comments
  • Stuart Hiam it's the big silver one!

  • Thanks, i checked both all ok

  • All ok here

— Honda RS150 CEBU Fan Page

%d comments
  • Wla bya kaau ko ka pamilyar dha boss. Bxta atbang sa norkus mandaue padng jmall.

  • Unsa na imong hub sa loyo og front boss

  • katood nko boss ako gi search sa instantstreetview hehehe.salamat boss.pwd diay sa RS ang clutch and handbreak sa CBR boss?

Photos from RG Antonio Z. Geronimo's post — Honda TMX 125 Alpha Forum Page

Beep beep beep makikiraan po

Hehe di talaga mkita ung kay Roj Twlv ang liit kc eh... salamat sa time Ernesto Jose Rosales Jerome Harn nextweek ulit kita kits para sa ibang kaganapan

#Tmx125alpha

#Tmx125B ulacanClub

#MiniEb

%d comments
  • Txt mo ko

  • Mag out na po ako ty

  • Ok cge2

I just ordered more stuff it s an addiction I swear lol I ordered some nicer... — Honda MSX125 Owners Forum

I just ordered more stuff...it's an addiction I swear lol. I ordered some nicer front brake pads to go with my new EBC rotor (gotta put new pads in anyways when I install the new rotor), and I ordered a 36T rear sprocket. I want more torque for easier wheelies in 1st and 2nd gear, and I just want 3rd and 4th gear to rev up quicker. So I'll be -1 tooth in the front and +2 teeth in the rear. Think that will be perfect for my style. And my wife is ordering me new Maxxis 6024 knobbie tires for my bday gift!

%d comments
  • Haha yeah I've done some serious adventuring on it. 460 mile trip in a day. Quite a few 350-400 mile trips. Love this little thumper.

  • Thanks for the Post and comments. Tim Hollis.

    The bike looks Amazing.

  • Thanks man! Slowly but surely I'm getting it dialed in!

Can anyone recommend clear front indicator lenses and where to get them thanks... — Honda MSX125 Owners Forum

Can anyone recommend clear front indicator lenses , and where to get them , thanks in advance

%d comments
  • I payed 15 each lense I'll do 25posted

  • And I'll chuck them bulbs in. Never been used

  • I will have them Dan !! Sent you a message on messenger

Not sure who s bike this is but I really like it and have a few question for... — Honda V45 and V65 owners (Sabre Magna)

Not sure who's bike this is but I really like it and have a few question for the owner about how they bopped it

%d comments
  • Mine is of off a vf500 interceptor. Fit pretty good. Minor trimming

  • I cut the frame back to the cross brace on the frame. Also cut a section of the center of the cross member to narrow the overall width of frame rails. Welded it all back together. The tail fender is original fender that was cut down. Filled in the holes where sissy bar mounted. Took the side plastic and extended them to meet up with the tail so that body lines matched. Seat is original foam that i shaved down and recovered. Mounted a LED taillight with integrated turn signals. Also bolted in lowering shocks. Chin piece is off of vf500. Headlight cowl is off of a drz400sm and fit around the square headlight nicely. Stage 3 jet kit with k&n filter and opened up air box. Piped are hollowed out and shortened. Running club bars. That's about it. Found this one rotting away outside for $300.

  • I looked around for that part but did find one when I was building. Looks factory. Nicely done!

Photos from Jason Vannus's post — Honda Shadow Aero

Some more add's, brochures & poster's featuring the Aero 1100 that I've collected from around the world.

%d comments
  • Thanks Kevin. Been collecting everything to do with Aero's since I bought mine new in Nov '98.Also have brochures on all the Shadow's. It's good to share them with like minded people.

  • I have a few pieces, but will keep watching for these.

  • Do you have any different ones to these Kevin?

Got a question. I keep hearing a churning sound coming from the engine area — Honda MSX125 Owners Forum

Got a question. I keep hearing a churning sound coming from the engine area... Not loud but i can hear with my helmet on and riding. I can feel the churning too.

The churning sounds get faster or slower with the speed of the bike... What is that?

%d comments
  • Well if it's still churning then, sprocket or bearing would be my guess.

  • Ok thanks for your help. Will get it checked out.

  • Its wear and tear of the chain! Got it changed no more churning sound! Thanks guys!!

Photos from Jon Westbrook's post — Honda MSX125 Owners Forum

So im terrible at mechanics... went to install some ebay special clutch/brake levers... never could get clutch back how it was... swapped back to OEM, having same issue. Clutch has no resistance... stalls when i put in gear. Probably should have taken pics before i started... was following a youtube video, which made it seem really easy. Any advice is appreciated. Here are pics of cable stop and quick adjuster. Seems like it needs about 1/2" more for fully engaged.

%d comments
  • The silver adjuster in pic 1 shouldn't be that close to the bar, wind it out a bit

  • Hold the adjuster locking ring (next to the black lever body) stationary and wind the barrel out until you have approx 8-10mm of free-play in the lever before you feel any resistance. Try it and see if it works. If it does, check the correct amount of free-play to have from someone that knows what it should be.. and that should be it sorted.

  • thanks alot my friend. so far the only thing i've ruined with my own mechanics, is a cheap chain for my wr250r. (got the chain breaker stuck in it and bent the chain lol)

XR update. Changed the pipe and repainted the tank from matte red to glossy red — HONDA XR125L and HONDA XR150L Community - Philippines

XR update. Changed the pipe and repainted the tank from matte red to glossy red. Kitakits sa Moto Builds Pilipinas 2016 June 11-12 sa Tiendesitas. :) #honda

%d comments
  • Ty sir lucero

  • No problem.

  • Shinko tires. :)

Some trivia. Has anyone else ever spotted the 1100 Aero in the movie Wild Hogs — Honda Shadow Aero

Some trivia: Has anyone else ever spotted the 1100 Aero in the movie "Wild Hogs". I wasn't sure when I first saw it at the cinema, couldn't wait for the Dvd to come out so I could check! The only bike in it that's not a Harley.

%d comments
  • Facebook is doing some weird stuff & I accidentally deleted the first photo.

  • I stand corrected on the color and year. According to further research, the Pearl Sedona Red and Dark Twilight Silver was a '99 color only.

  • Dead center where it should be haha

Just about done bobbing my 06 aero what a fun project started as a full bagger... — Honda Shadow Aero

Just about done bobbing my 06 aero what a fun project started as a full bagger stripped to almost nothing

%d comments
  • U will miss the confort...but very nice proyect

  • Trust me the stock seat was not comfortable at all onlynpart i will mis is the storage aspect but mey lols

  • You are right about that stock seat! I can't take more than two hours on mine.

Good afternoon sir tignan niyo sa timeline ko tmx 125 alpha nasagad ng halos... — Honda TMX 125 Alpha Forum Page

Good afternoon sir tignan niyo sa timeline ko tmx 125 alpha nasagad ng halos 130 nabalik na sa neutral may angkas pa sir . Share lang.

%d comments
  • hahasain o kikikilin? maliit ba butas nun?

  • npanuod ko na rn. parang khrap paniwalaan pero un ung nkta ko haha lumagpas na sa 120kph share ka nmn jan paps

  • ok ah.....

Kept this photo from a magazine because it has an Aero in it. Can you spot it — Honda Shadow Aero

Kept this photo from a magazine because it has an Aero in it! Can you spot it?

%d comments
  • Got it one!

  • actually it's a red black combination just like mine

  • I have two that colour scheme, was the only colour you could get 98's in Australia. 99's were the red/silver only. Only had them for 2 years.

OK can t get these out snapped and well no need to say more. Any ideas — Honda 350x

OK can't get these out, snapped and well no need to say more. Any ideas.

%d comments
  • That's a killer deal!!

  • I take all mine to local engine shop, if they're just broken and not messed with $50 per head, not even worth my time trying

  • that dosent sound like a bad deal at all.

What do you guys think The phone case won t always be on but I wanted to see... — Honda Shadow Spirit Ace Aero Riders

What do you guys think? The phone case won't always be on but I wanted to see how it looked. The radio is Bluetooth so I don't get am/fm but I could care less about that. I wired it as a stand alone system so I didn't have to tap into the wiring harness. That's why there is a kill switch on the left.

%d comments
  • 2001

  • I would love the vid

  • Ok. I'll do video soon and post it. After figuring out where the hell to put the amp it was really easy.

Mga boss bkq may malapit sa inyo sa grotto — Honda TMX 125 Alpha Forum Page

Mga boss bkq may malapit sa inyo sa grotto..

Meet up kami mga tropa maya dun after lunch 1pm sana may mga mapadaan ohh sumadya man lang sa EB..

Tara tara tara tara tara mga boss minsan lang ehh..

#respect

#tmxalphaowner

%d comments
  • subic hills

  • magkano boss lowering crown?

  • 600 sr pero kapag sa ec mo sya binili nasa 650 kaya lang kapag bumili ka ng lowering crom baguhin ma din yung braket 20 lang yung makapal na braket na nabibi sa shop

Mga paps OPERATION TULI aq sa alpha q Ok kya tung gagamitin q concrete at... — Honda TMX 125 Alpha Forum Page

Mga paps .. OPERATION TULI aq sa alpha q .. Ok kya tung gagamitin q ..concrete at martilyo png silsil ..I guide nyo aq mga paps

%d comments
  • Panu po sasabihin q sa machine shop paps Ismael .. Mgkano lht ggastusin ..

  • Say u lng sir Magkanu paalis spot mung silincer ng tambotso ask u muna..acitilint pagamit u..bsta nd tataas 100 yan.kc cmple lng yan

  • Ah ok salamat ng mrame paps

— Honda Rebel 125 250 450

????

%d comments
  • Awesome. Had to run didn't get to dink around with it. It also would die if I put it into gear? Adjust the cutch?

  • Na, just doesn't have enough power, can be the carb isn't getting enough fuel, check the fuel mixture screw

  • Also check the petcock on the gas tank, mine would clog all the time cause of the inside filter, took it out and ran in line fuel filter Mike Vaccaro

I want to sell the pipes from my 2001 Aero Just too loud or I m getting too... — Honda Shadow Aero

I want to sell the pipes from my 2001 Aero. Just too loud (or I'm getting too old)

Anyone interested?

I went back to the stock pipes.

%d comments
  • I ended up with another set. Thanks for remembering to get back to us!

  • Anything happening with these? I am still interested

  • I've got a very clean Roadhouse slip on muffler with original pipes if you're looking for a partial trade? It sounds awesome!

We ve got power Just plugging in the last things and want to try to fire her... — Honda Rebel 125 250 450

We've got power! Just plugging in the last things and want to try to fire her up but still not sure where this tube goes? Any ideas

%d comments
  • That should be a vent tube. You're good.

  • Is that the one that goes conected to the fuel tank

  • I think that goes under the bike it the clip on right side with puke tube..not 100 % tho

Photos from Tim Hollis's post — Honda MSX125 Owners Forum

I must say, I nailed it. Pics don't do it justice, she looks bad fuckin ass. My new FMF full exhaust is in the mail as well, will have it on Tuesday next week

%d comments
  • It takes a lot to pull carbon off. I think you have done a good job of it. So you have pulled it off well

  • Thanks Jay I appreciate it!! I'm actually surprised/proud of myself for what I've accomplished so far on the bike, it's exactly what I've envisioned, so it's a great feeling seeing it come to fruition with your own 2 hands

  • yeah mate ive got a mate who's good with shit like this got all stiff in his shed

— Honda Shadow Aero

%d comments
  • 67 cubic inch it says. that is a 1998. did the cubic inch change when the 2001 went to dual pin? anybody know?

  • Capacity stayed the same. 1100cc."in modern terms"!

  • Was taken from a magazine & laminated, that's why it's a bit cloudy. I have a collection of catalogs, magazine reviews and memorabilia that I'll post photos of.

Has anyone on here use the progressive fork lowering kit for a 2000 Honda... — Honda Shadow Aero

Has anyone on here use the progressive fork lowering kit for a 2000 Honda Shadow Aero 1100 and what did they cut their spacers to achieve 1 inch lower?

%d comments
  • I changed the fork seal while I'm at it.

  • I don't know if it's in the manual (they may just give an exact oil amount to use), but you can measure the oil level from the top of the tube to get the proper fill level. You'll have to google that one.

  • I looked on a forum that said 15.2 or 6.8 from the top of depress tube with out spring in. Thanks for the insight.

Ok I know more of you on here then the 200X page so I ll ask here first — Honda 350x

Ok, I know more of you on here then the 200X page so I'll ask here first. I'm sure alot of you have 200X's and I'm looking to see of anyone is running more then the stock amount of fork oil in their forks? 85 200X

%d comments
  • Thanks!

  • Hmmmm, been awhile but seems like the owner's manual said to use ATF in forks, but I've always used Bel Ray fork oil...

  • Atf is inconsistent at different temperatures.. I always use BELRAY fork oil

whats the best way to hook my 24 inch light bar up on my 2004 rancher — Honda Rancher Forum

whats the best way to hook my 24 inch light bar up on my 2004 rancher

%d comments
  • Guess the most positive part is to have a bar light. Those damn stock lights look like damn candles in comparison. They're a blessing in disguise. I can't believe the years of yellow light rides before they became popular. Lol

  • As you can see my headlights are useless.

  • Yessir. I remember those days of washing them in muddy gar holes to clean em. Bahahahahahaha.

Mga sir tanong lang ako kung magkano po ang budget mgpapalit sa ganitong kaha — HONDA XR125L and HONDA XR150L Community - Philippines

netboard

Mga sir tanong lang, ako kung magkano po ang budget mgpapalit sa ganitong kaha. Salamat po. :)

%d comments
  • saan ilalagay ang battery pag ganyan sir?

  • Que buen trabaja mas fotos

  • Apil bangko ana tabason