Photos from John S. Travale's post

This is a great page! Thanks for all the help!!! I purchased the Tusk enduro wiring kit for simplicity sake. Works great with a battery, but wanted to wire it up from the stator using a reg rec. I purchased the reg/rec 12v from Dr. ATV. I have been unable to get it to work from the stator. I wired the positive from the harness to the yellow from the reg/rec and grounded the black wire. from the reg/rec, put the 'left' green wire to the hot wire from the engine(tried other wires coming off the engine as well), but can't get the thing to turn on. I did check to make sure all the other connections have been made. the handdrawn sketch was for just a two wire regulator. Any help would be appreciated.

0 comments