• What carbs will fit on a 350x mine is fucking shot cleaned everything with all...

    What carbs will fit on a 350x mine is fucking shot cleaned everything with all new seals and still fuckin leaks

    10 comments
    • Dan you have to bend the little piece of metal on the float that touches the valve. Bend it up a little so it closes sooner.

    • All of my carbs all brands also leak like a mother when I take them apart and clean them (or boil them) and put them back together AT FIRST while the fuel is filling the bowl and all the air bubbles and the seal is sealing.

    • I have also had a cheap china carb on a lifan 125 that had a slow drip when it was new but it has magically fixed itself. Thumbs up for procrastination that pays off

    • Ever used Teflon tape?

    • Not on a carb I haven't. Do you use it for a bowl seal or what?

    • On the drain screws from the bowls especially the khein carbs (sp?) I've had tiny orings disappear, and I've worked on some with the wrong screw wrong thread count and it was partially stripped and damaged. White Teflon tape the threads as needed and tighten it and don't touch it.

      I also have one where the drain port/tube won't stop leaking. So I bought a variety pack vacuum T connector kit and ran the hose back into its self and it forced its self to stop.

    • Dude I almost guarantee your float is bad. Squirt starting spray directly onto the float in your hand then shake it. If you hear fuel in it swashing it's bad and ghetto fix it or get a new one. It's heavy enough to sink the float. Which makes the float needle or whatever it's called open and allow fuel to flow in even if it is "full" it will keep coming in because the float is sunk just enough and your carb will be leaking out the seal from the bowl & where the carb meet.

    • I think my bowl gasket isn't on all the way al check it out tomaro night

    • If it won't stop fuck it run it

    • Check my video