• What s the best way to separate these 2 pieces

    What's the best way to separate these 2 pieces

    6 comments
    • Don't just leave it together mate, chances are you will damage the roll cage trying to get it apart.

    • It won't come apart leave it be I tried for days and it wouldn't budge

    • soak the shit out of it with pb blaster for a few days and use a portapower if it starts to bend leave it

    • If your rig has been rolled, forget about it. Leave it alone

    • It's pretty easy. Take out the 2 bolts clamping the roll cage to the lower cage. Unbolt the back to bolts (rear corners) that connect the roll cage to the lower cage. Then take out the 3 bolts on each corner where the roll cage meets the frame in the rear. You may have to unbolt the front portion of the roll cage from the upright bars alongside the foot pan. You may have to tap back and forth with a rubber Mallet. I've done about a dozen of these.

    • I can't count how many fl250 I seen destroyed in this area. You been warned.